I have an HP psc 2400 all in one and like to scan pictures.
Lately I notice that it is foggy or somewhat dirty on the bottom side of the glass.
Does anyone know how to remove the glass to clean it????
Thanks!
Full Version: HP psc 2400 foggy glass
QUOTE (SmionR @ Nov 23 2007, 03:07 AM) 
Where did you find anything helpful in the manual?????
The process is quite simple
1.- take off the top cover (the cover wich has a white bottom).
2.- take off the top left panel (which has all the labels). It just pops up.
3.- Under this panel there is a drawing wich describes how to put it back. between the circles marked 1 and 2 there is a small rectangular hole, put a screwdiver in this hole and push down (with this you unlock the keypad); at the same time pull the key pad towards the front. Be carefull, it has 2 ribbon cables attached to it.
4. Take off the 5 screws that lock the top cover with the glass:
2 screws are on the left.
1 screw is on the back, where the top/white was mounted.
2 screws are on the right, where the keypad was mounted.
I hope this will help you.
Saludos
Claudio
1.- take off the top cover (the cover wich has a white bottom).
2.- take off the top left panel (which has all the labels). It just pops up.
3.- Under this panel there is a drawing wich describes how to put it back. between the circles marked 1 and 2 there is a small rectangular hole, put a screwdiver in this hole and push down (with this you unlock the keypad); at the same time pull the key pad towards the front. Be carefull, it has 2 ribbon cables attached to it.
4. Take off the 5 screws that lock the top cover with the glass:
2 screws are on the left.
1 screw is on the back, where the top/white was mounted.
2 screws are on the right, where the keypad was mounted.
I hope this will help you.
Saludos
Claudio
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.